PLANET WGSW-48040HP - Manual (Page 84)

Command Guide of WGSW-48040HP
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ip arp inspection trust
4.2.45.29 ip dhcp snooping trust
Command:
ip dhcp snooping trust
Default:
Trusted
Usage Guide:
To configure Trusted into DHCP Snooping for specific interface
Example:
To configure Trusted into DHCP Snooping for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
Switch (config-if) # ip dhcp snooping trust
4.2.45.30 ip igmp snooping filter
Command:
ip igmp snooping filter <ProfileName : word16>
<ProfileName : word16> Profile name in 16 words
Default:
N/A
Usage Guide:
To apply the IGMP Snooping filter ID for specific interface
Example:
To apply the IGMP Snooping filter ID 1 for GigabitEthernet X/X
Switch# configure terminal
Switch (config)# interface GigabitEthernet X/X
-84-