PLANET WGSW-48040HP - Manual (Page 330)

Command Guide of WGSW-48040HP
Example:
To display the IP Multicast Range.
Switch # show ipmc range
Range Name : 1
Start Address: 224.24.24.24
End Address : 224.24.24.25
4.20.49 show ipv6 interface
Command:
show ipv6 interface [ vlan <vlan_list> { brief | statistics } ]
show Show running system information
ipv6 IPv6 configuration commands
vlan VLAN of IPv6 interface
brief Brief summary of IPv6 status and configuration
statistics Traffic statistics
Default:
N/A
Usage Guide:
To display the IPv6 configuration.
Example:
To display the IPv6 configuration.
Switch # show ipv6 interface
IPv6 Vlan1 interface is up.
Internet address is 2001::7766
Internet address is fe80::201:c1ff:fe00:9900
Static address is 2001::7766/64
IP stack index (IFID) is 2
Routing is enabled on this interface
MTU is 1500 bytes
IPv6 Statistics on Interface VLAN: 1
Rcvd: 3 total in 168 bytes
-330-