PLANET WGSW-48040HP - Manual (Page 224)

Command Guide of WGSW-48040HP
4.2.125 poe sequential enable
Command:
poe sequential enable
poe Power Over Ethernet
sequential PoE sequential is to delay power feeding when the switch is completely booted.
enable poe sequential enable
Default:
Enabled
Usage Guide:
To enable Sequential Power up Option.
Example:
To enable Sequential Power up Option.
Switch# configure terminal
Switch (config)# poe sequential enable
4.2.126 poe sequential interval
Command:
poe sequential interval <1-30>
poe Power Over Ethernet
sequential PoE sequential is to delay power feeding when the switch is completely booted.
interval Set how long system should feeding power to next PoE interface <1-30>
<1-30> poe sequential enable
Default:
5
Usage Guide:
To configure Sequential Power up Interval.
Example:
To configure Sequential Power up Interval (30 seconds per port).
Switch# configure terminal
Switch (config)# poe sequential interval 30
-224-