PLANET WGSW-48040HP - Manual (Page 155)

Command Guide of WGSW-48040HP
0
Usage Guide:
To configure CoS priority of MLD snooping for specific VLAN
Example:
To configure CoS priority (5) of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping priority 5
4.2.46.23 ipv6 mld snooping querier election
Command:
ipv6 mld snooping querier election
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
querier MLD Querier configuration
election Act as an MLD Querier to join Querier-Election
Default:
Enabled
Usage Guide:
To enable Querier-election of MLD snooping for specific VLAN
Example:
To enable Querier-election of MLD snooping for VLAN X
Switch# configure terminal
Switch (config)# interface vlan X
Switch (config-if-vlan)# ipv6 mld snooping querier election
4.2.46.24 ipv6 mld snooping query-interval
Command:
ipv6 mld snooping query-interval <IpmcQi : 1-31744>
ipv6 IPv6 configuration commands
mld Multicast Listener Discovery
snooping Snooping MLD
-155-