PLANET WGSW-48040HP - Manual (Page 227)

Command Guide of WGSW-48040HP
4.2.131 poe usage-threshold
Command:
poe usage-threshold <1-99>
poe Power Over Ethernet
usage-threshold The poe usage-threshold command sets a percentage threshold above which the system sends a
log or SNMP trap.<1-99>: The -threshold percentage configured with this command.
<1-99> The usage-threshold percentage configured with this command.
Default:
85
Usage Guide:
To configure PoE Usage Threshold.
Example:
To configure PoE Usage Threshold (90 %).
Switch# configure terminal
Switch (config)# poe usage-threshold 90
4.2.132 poe-time-range
Command:
poe-time-range {profile1 | profile2 | profile3 | profile4}
poe-time-range Used to create PoE time-range for the switch and enter Power Time-range
Create Configuration Mode.
profile1 The PoE time-range profile name, ranging from Profile 1
profile2 The PoE time-range profile name, ranging from Profile 2
profile3 The PoE time-range profile name, ranging from Profile 3
profile4 The PoE time-range profile name, ranging from Profile 4
Default:
N/A
Usage Guide:
To enter PoE time-range profile mode.
Example:
To enter PoE time-range profile 1 mode
-227-