PLANET WGSW-48040HP - Manual (Page 244)

Command Guide of WGSW-48040HP
Switch# configure terminal
Switch (config)# qos wred queue 1 min-th 2 mdp-1 3 mdp-2 4 mdp-3 5
4.2.146 radius-server attribute 32
Command:
radius-server attribute 32 <Id : line1-253>
radius-server Configure RADIUS
32 NAS-Identifier
Default:
None
Usage Guide:
To configure the NAS-Identifier
Example:
To configure the NAS-Identifier (planet)
Switch# configure terminal
Switch (config)# radius-server attribute 32 planet
4.2.147 radius-server attribute 4
Command:
radius-server attribute 4 <Ipv4 : ipv4_ucast>
radius-server Configure RADIUS
4 NAS-IP-Address
-244-