PLANET WGSW-48040HP - Manual (Page 175)

Command Guide of WGSW-48040HP
ip Internet Protocol
helper-address DHCP relay server
<Ip : ipv4_ucast> IP address of the DHCP relay server
Default:
None
Usage Guide:
To configure IP address of DHCP.
Example:
To configure IP address (1.1.1.1) of DHCP.
Switch# configure terminal
Switch (config)# ip helper-address 1.1.1.1
4.2.56 ip http secure-redirect
Command:
ip http secure-redirect
ip Internet Protocol
http Hypertext Transfer Protocol
secure-redirect Secure HTTP web redirection
Default:
Disabled
Usage Guide:
To redirect WebUI from HTTP to HTTPs
Example:
To redirect WebUI from HTTP to HTTPs
Switch# configure terminal
Switch (config)# ip http secure-redirect
4.2.57 ip http secure-server
Command:
ip http secure-server
-175-