PLANET WGSW-48040HP - Manual (Page 351)

Command Guide of WGSW-48040HP
Command:
show ptp <clockinst> { default | current | parent | time-property | filter | servo | clk |
ho | uni | master-table-unicast | slave | { { port-state | port-ds | wireless |
foreign-master-record } [ interface ( <port_type> [ <port_type_list> ] ) ] } }
show Show running system information
ptp Precision time Protocol (1588)
<Clockinst : 0-3> Show various PTP data
clk Show PTP slave clock options parameters.
current Show PTP current data set (IEEE1588 paragraph 8.2.2).
default Show PTP default data set (IEEE1588 paragraph 8.2.1).
filter Show PTP filter parameters.
foreign-master-record Show PTP port foreign masters.
ho Show PTP slave holdover parameters.
interface Search by port
master-table-unicast Show PTP master list of connected unicast slaves.
parent Show PTP parent data set (IEEE1588 paragraph 8.2.3).
port-ds Show PTP port data set (IEEE1588 paragraph 8.2.5).
port-state Show PTP port state.
servo Show PTP servo parameters.
slave Show PTP slave clock lock threshold parameters.
time-property Show PTP time properties data set (IEEE1588 paragraph 8.2.4).
uni Show PTP slave unicast configuration parameters.
wireless Show PTP port wireless parameters.
Default:
N/A
Usage Guide:
To display the PTP information.
Example:
To display the PTP default information for PTP instance 0.
Switch # show ptp 0 default
ClockId DeviceType 2StepFlag Ports ClockIdentity Dom
------- ---------- --------- ----- ----------------------- ---
0 Ord-Bound True 29 00:01:c1:ff:fe:00:99:00 0
ClockQuality Pri1 Pri2
------------------------- ---- ----
Cl:251 Ac:Unknwn Va:65535 128 128
Protocol One-Way VLAN Tag Enable VID PCP
-351-