Motorola MVME172 - Manual (Page 155)

LCSR Programming Model
http://www.mcg.mot.com/literature 2-77
2
Notes 1. X = The contents of vector base register 0.
2. Y = The contents of vector base register 1.
3. Refer to the Vector Base Register description later in this
chapter for recommended Vector Base Register values.
DMAC $X6
:
:
VMEbus Interrupter Acknowledge $X7
Tick Timer 1 $X8
Tick Timer 2 $X9
VMEbus IRQ1 Edge-Sensitive $XA
(Not used on MVME172) $XB
VMEbus Master Write Post Error $XC
VMEbus SYSFAIL $XD
(Not used on MVME172) $XE
VMEbus ACFAIL $XF Highest
Table 2-3. Local Bus Interrupter Summary (Continued)
Interrupt Vector
Priority for Simultaneous
Interrupts