Siemens Sinumerik 810T - Manual (Page 105)

09.91 3 Operating Sequences
3.1.4 Tool offset
9 L2 Basic
8 L1 Basic Identifiers P = ”8” and P = ”9” are reserved
for special uses.
The ”Basic dimension” permits an additional
tool length offset.
The standard list of identifiers 0 to 9 can be raised to a
maximum of 16 via MD.
Operate the ”Tool offset” softkey.
(This is possible in all operating modes).
TOOL
OFFSET
Sequence of operation
This input screen form appears. The
current input field (=the field into
which your input will be transferred) is
displayed in inverse video (here in the
first line).
((Bild 810T/16 einmontieren))
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-7
SINUMERIK 810T, GA3 (BN)