Siemens Sinumerik 810T User Manual
Page 127
3 Operating Sequences
09.91
3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.”
Operate the ”SETTING DATA” softkey in any of the operating
modes.
Operate the ”R PARAMETERS” softkey.
SETTING
DATA
R PARA-
METER
Sequence of operation for ”R PARAMETER” setting data
This input screen form appears with
the input field marked in inverse video.
((Bild 810T/22 einmontieren))
Using the ”channel switchover” key, select either channel ”CH1”
or ”CH3” (marked in inverse video in the upper right hand corner
of the display).
Now operate any of the cursor keys to position the cursor to the
desired input field of the displayed R parameters.
1 ... n
3-26
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)