1 influencing the program – Siemens Sinumerik 810T User Manual
Page 197
3 Operating Sequences
09.91
3.2.3 Influencing ”AUTOMATIC” operation
3.2.3.1
Influencing the program
With the operation of the softkeys described here, the active program is influenced.
PROGRAM
CONTROL
Operate the ”PROGRAM CONTROL” softkey in the
”AUTOMATIC” or ”MDI AUTOMATIC”operating mode.
Sequence of operation
This CRT display with a menu of 5
functions appears.
((Bild 810T/43 einmontieren))
By operating any of the 5 softkeys, you can now change over the preset ”NO” to ”YES”. A
function marked with ”YES” is active.
SKIP BLOCK
YES-NO
You select, for example, the ”SKIP BLOCK” softkey function .
Display:
Skip block
YES
Blocks in the program which are marked with an oblique before the block number
(”/ N ...”) are skipped.
3-94
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)