Siemens Sinumerik 810T User Manual
Page 48
2 Operation
09.91
2.1.2 SINUMERIK 810T operator interface with external machine control panel
The following values are specified in machine data:
- the max. spindle speed
- the values for the spindle speed
override switch positions.
Feed stop/Feed start
When you operate the ”Feed stop” key:
•
the feed drives are brought to a standstill
•
the red ”Feed stop” LED
lights up.
Examples of the use of ”Feed stop”
•
during operation in ”MDI AUTOMATIC” mode, a block with a fault is discovered
•
in ”JOG”, ”INC..”,”REPOS” modes, e.g. during repositioning to the contour
•
to change a tool
•
to input S, T, H, M functions during setting up (overstore).
When you operate the ”Feed start” key:
•
the feedrate is accelerated to the value given in the part program.
The following values are specified in machine data:
- the feed and rapid traverse rates
- the values for the feedrate override switch positions
- whether the feedrate override switch is also active
for rapid traverse.
2-30
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)