Siemens Sinumerik 810T User Manual
Page 219
3 Operating Sequences
11.90
3.2.4 ”Manual data input - automatic” (MDI AUTOMATIC) mode
3.2.4
”Manual data input - automatic” (MDI AUTOMATIC) mode
In this operating mode, you can process individual operations, block by block under NC
control. After the blocks entered have been processed, they are deleted.
Operate the operating mode selection key on the
integrated machine control panel, and then the
”MDI-AUTOMATIC” softkey or...
... set the operating mode selector switch on the
external machine control panel to this symbol.
or
MDI
AUTOM.
and
Sequence of operation
This screen form appears with the
input field marked in inverse video.
(( 810T))
(( Bild 5 von Druckerei
einmontieren
Using the numerical keyboard enter a block
following the guidelines in the Programming
Instructions, and terminate each input in-
cluding ”LF” (end of block) using the input
key.
N
...
G
...
X
7
LF
+
...
3-114
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)