Siemens Sinumerik 810T - Manual (Page 99)

01.93 3 Operating Sequences
3.0 Preliminary remarks
3 Operating Sequences
3.0 Preliminary remarks
In the previous Sections, the functions of the individual operating elements were described in
detail.
This Section shows how to use the operating elements in frequently occurring operating
sequences.
It explains:
Which operating elements are used?
... and in which order?
The Section is divided into two parts:
• In the first part (preparation) operating methods are explained that you use before, during
or after program input or that you use only once before you start the control operation.
• In the second part (operating) the operating methods are explained that occur during
processing.
• In the following subsections, the part of the illustrations shaded grey show the function of
the dual function keys required.
• In screen forms without an extension (>), the S value for the leading spindle is displayed
under S.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-1
SINUMERIK 810T, GA3 (BN)