Siemens Sinumerik 810T - Manual (Page 43)

2 Operation 11.90
2.1.2 SINUMERIK 810T operator interface with external machine control panel
INC FEED...
Incremental Feed
(5th to 9th position)
MANUAL DATA INPUT/
AUTOMATIC
ACTUAL VALUE
SETTING
PRESET
Preset Setpoint
(1st position)
TRAVERSE TO
REFERENCE POINT
REPOSITIONING
Reapproach contour
AUTOMATIC
OPERATION
Processing of stored
programs
INCREMENTAL
TRAVERSE
FEED/
JOG
1, 10, 100,
1 000, 10 000
Operating mode selector switch
This rotary switch with 13 latched
positions enables you to select the
following operating modes:
1
10
10 000
1 000
100
Symbol on the
selector switch
Function
Designation of the
operating mode
MDI - AUTOMATIC
Manual Data Input -
Automatic
(2nd and 3rd position)
JOG
Jogging
(4th position)
REPOS
Reposition
(10th position)
AUTOMATIC
(11th and 12th position)
REFPOINT
Reference Point
(13th position)
2-26 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)