Siemens Sinumerik 810T - Manual (Page 19)

09.91 2 Operation
2.1.1 SINUMERIK 810T operator interface with integrated machine control panel
Keys below the CRT display
PART
PROGRAM DIAG-
NOSIS DATA
IN-OUT SETTING
DATA TOOL
COMP.
>
RECALL key for jump back to a higher-level menu in the text display
By pressing the RECALL key, you change the softkey functions
displayed and return to a higher-level menu.
By pressing any one of the 5 softkeys (a softkey is defined as a key that
does not have a fixed function), you select the required softkey functions,
shown in the menu directly above the softkey.
Softkeys
ETC key for extension of the same menu
By pressing of the ETC key, you change the displayed softkey function
in the text display.
Further functions for the same menu are shown.
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-3
SINUMERIK 810T, GA3 (BN)