Siemens Sinumerik 810T - Manual (Page 202)

3 Operating Sequences 09.91
3.2.3 Influencing ”AUTOMATIC” operation
You extend the softkey menu called under ”PROGRAM CONTROL” ...
(( 810T))
(( Bild 44 von Druckerei
einmontieren
... and subsequently operate the ”DRF-HANDWHEEL-ENABLE” softkey.
Display: DRF handwheel enable YES
DRF
YES-NO
You have activated ”DRF” (Differential Resolver Function). It is now possible to activate the
handweel for the selected axis.
The handwheel-to-axis assignment is defined in axial setting data (see Section 3.1.6).
It is always only possible to activate one axis with one handwheel. If a second axis is selected,
the previously selected axis is automatically deactivated (see Section 3.2.9
“HANDWHEEL”
and Section 3.2.10 “DRF” for further details).
3-98 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)