Siemens Sinumerik 810T - Manual (Page 215)

3 Operating Sequences 11.90
3.2.3 Influencing ”AUTOMATIC” operation
If the deletion range is defined as MP = 0-8999 or
SR = 100-799,
then the main programs with the numbers 9000 and
the subroutines 99 or 800
are not deleted prior to retroloading. They remain in the memory throughout OPS!
2) The program list must have been completed.
3) All files which are to be processed according to the numbers in the program sequence list
must exist on the diskette inserted.
The display below appears on the screen. You can now start, monitor and
interrupt program sequencing.
RUN
OPS
Sequence of operation
You operate the “RUN OPS” softkey.
(( 810T))
(( Bild 50 von Druckerei
einmontieren
3-110 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)