Siemens Sinumerik 810T - Manual (Page 130)

09.91 3 Operating Sequences
3.1.6 Setting data: ”R PARAMETERS”, ”SPINDLE”, ”AXIAL”, ”ANGLE OF ROTATION”, ”SCALE MODIFICAT.”
” AXIAL” setting data
Using an input screen form, you can enter/modify the following data via
”SETTING DATA”:
Designation
Standard
setting data
(delivery state)
Maximum
input value
Input
unit
Dry run feed rate
Min. working area limit
Max. working area limit
0
0
0
e.g. 24000
+/-99999999
+/-99999999
1000 units/min
(Reference system:
IS)
units
(Reference system:
IS)
units
(Reference system:
IS)
Please consult the machine tool manufacturer for the
"Maximum input value".
Operate the ”SETTING DATA” softkey in any operating mode.
Operate the ”AXIAL” softkey.
Extend the softkey menu displayed using the ETC key to the
right below the display.
AXIAL
SETTING
DATA
Sequence of operation for ”AXIAL” setting data
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-29
SINUMERIK 810T, GA3 (BN)