Siemens Sinumerik 810T User Manual
Page 158
3 Operating Sequences
11.90
3.1.12 Program correction (”EDIT”): Insert/modify/delete word, insert/delete block
• • •
• • •
• • •
Enter the block number to be input (”N4”
in example) and store it with the input
key.
Using the keyboard now enter the block
information word for word, and store each time
with the input key.
Delete block
Position the cursor in front of the
block to be deleted (”N10” in the example).
N 10
................
LF
Using the keyboard, enter ”N10” and
operate the ”Delete word/block” key.
For blocks without a block no. N... proceed as follows:
Position the cursor in front of the
first word in the block to be deleted,
(in the example, preparatory function”G....”)
G
.....
F
.....
X
.....
LF
Using the numerical keys enter ”N0”
(0=zero) and then operate the ”Delete
word/block” key.
End the new block with ”LF” (end of
block), and also complete this input
with the input key.
..
.
etc.
N
4
I
G
...
X
7
...
LF
+
N
1
F
0
S
N
0
S
3-56
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)