Siemens Sinumerik 810T User Manual
Page 60
Advertising
2 Operation
09.91
2.3.3 Selection of operating modes
Further selection:
REFPOINT mode (traverse to reference point)
Operate the
key on the machine control panel.
You operate this softkey.
The basic display for ”REFPOINT” mode is shown on the CRT display.
REF-
POINT
>
Operate the ETC key
under the CRT display twice.
The menu
shows you the
function of the
softkey.
2-40
© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)
Advertising