GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 111)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
111
Software
This section provides access to save a site’s configuration, restore a site configuration,
and the ability to load or upgrade various controller software modules through the web
page interface.
Save Configuration Clicking on this link provides a self-explanatory path to perform a
backup of the controller’s configuration to a “config.gal” file. The
intention of this file is to store a sites entire configuration. This file then
can be used to restore the site in the event of a failure or configuration
reset. The “config.gal” file is a text editable file. Items can be
eliminated or changed to allow other sites to be restored to a similar
condition. The “.gal” extension must be preserved. Future release of the
controller software will allow the prefix of the file to be variable and
loaded through the web pages.
Restore Configuration Clicking on this link provides a means to locate the “config.gal” file
and restore a system controller using a known configuration file.
Updates can also be made through a configuration file that has been
edited. A “please wait” will be presented during the Uploading process
and removed when the operation is complete.