GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 46)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
46
Buttons Description
Direction Buttons
In the Menus, the
◄▲▼► direction buttons navigate to
make a selection. A black box highlighting a menu item
indicates that the item has sub-menus.
Parameter Change
Display Contrast
When changing a system parameter, the
▲▼ buttons
increase or decrease the value of the parameter.
Contrast adjustment is also available through the menus at
MenuConfigurationSystem Settings.
Enter Button
Enters a sub-menu or confirms a parameter change. From
the Home Page only, goes to the top level Main menu.
ESC Button
Goes up one menu level or exits a parameter change
without saving.
System Status Display
LCD Backlight
The Galaxy Pulsar Edge controller family incorporates an alarm sensitive back-light indicator to
help assist in providing a clear indication of the system status. Severities of alarms can be
configured through the remote interfaces. Following is a basic description of the backlight
functionality.
The incorporated display technology can support a wide
range of backlight colors. Present implementation supports
three basic colors to indicate the alarm severity present in the
system: Green, Amber, and Red
The highest severity in the system will take precedence.
Status Function Condition
Normal
Normal operation, no alarms, inputs and
outputs are in their normal range.
Major Alarm
High severity. Generally assigned to alarm
to indicate a Power affecting condition.
Immediate attention required.
Minor Alarm
Medium severity. Generally assigned to
alarm to indicate a non-power affecting
condition. Attention eventually required.