GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 179)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
179
Appendix D: Default Configurations
Tables D-1through D-4 provide the default settings for the configurable parameters and features
that are associated in the Pulsar Edge. Also listed are the battery technologies and specific battery
models included in the configuration file previously shown in Appendix C. Specific battery
models assume the configuration defaults for their generic technology class except for a specific
capacity and model name. The generic Valve Regulated Lead Acid battery type will be the
factory default Battery Type selected and configured for the Pulsar Edge configuration. Changes
to individual features, parameters, and thresholds for each battery type will be allowed in the
field. These changes will be stored in non-volatile memory. However, if the Load Factory
Defaults control/operation command is initiated, all assigned values shown in Table C-1 and
Table D-1 through Table D-4 will be restored. The configurations made in the field will be lost
unless they were backed-up.
There are five sections for determining the defaults for the standard configuration program file.
These sections are Standard, 48V Battery, 24V Battery, Converters, and Alarms. This
document will show four separate tables for these categories. In addition, the Excel spreadsheet is
also attached.
The Standard section includes settings and thresholds independent of the primary output voltage
of the system. Generally, these items are set using information that does not depend on the battery
reserve system.
The 48V Battery section includes settings and thresholds that are generally dependent of the
primary 48V output voltage of the system. Generally, these items are set using information that
depends on the battery reserve system configured.
The 24V Battery section includes settings and thresholds that are generally dependent of the
primary 24V output voltage of the system. Generally, these items are set using information that
depends on the battery reserve system configured.
The Converters section contains the settings and thresholds associated with DC/DC converters
and converter systems.
The Alarms section provides the assigned severities, alarm output relays (if present), and LED
assignments for the standard configuration.
This document will continue to be revised and updated as feedback and additional requirements
come in from the field or as new configurable features and thresholds are added to the standard
Pulsar Edge. Features, thresholds, and other configurable items not addressed in the list will
remain at the factory default set for each respective item as defined in the standard product
offering. Note: Custom configurations can be made available through configuration of
application or customer preferred defaults for the information in the following tables for certain
application.