GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 162)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
162
Module n Channel c)
msnc,stt State
 
text None, Present, Missing
msnc,val Value  Number Mid-String voltage
msnc,did Duplicate Id

Number 0=no 1=yes
Where n is the Mid-String module number from 1 to 7, and
c is the Mid-String channel number from 1 to 3
NET-Network Settings Related
Commands
obj,attr Description sta cha ope type Range of Values
net1,des Description
 
text 30 char (Mid-String Voltage
Module n Channel c)
net1,ead Ethernet (MAC) Address

text hh:hh:hh:hh:hh:hh
net1,sor DHCP server hardware override  number 0=off, 1=on
net1,dhcp DHCP
   1 number 0=static IP, 1=DHCP Client
(OPE causes system reboot)
net1,ip Static IP address
 
IP
address xxx.xxx.xxx.xxx (not used if
DHCP enabled)
net1,sub Static Subnet Mask   IP
address xxx.xxx.xxx.xxx (not used if
DHCP enabled)
net1,gtwy Static Gateway (Router) IP
 
IP
address xxx.xxx.xxx.xxx (not used if
DHCP enabled)
net1,host Hostname   text
net1,wip Working IP address  xxx.xxx.xxx.xxx (shows
DHCP assigned or static IP
address)
net1,dom Static Domain Name
 
text (not used if DHCP enabled)
net1,dns Static DNS IP
 
IP
address xxx.xxx.xxx.xxx (not used if
DHCP enabled)
net1,wre Write Enable
 
0=disabled, 1=enabled
net1,tmo Session Timeout
 
Minutes
net1,msrv Mail host IP   IP
address xxx.xxx.xxx.xxx (0.0.0.0
will force a DNS lookup of
“mailhost”)
net1,ntp Network Time Server IP address
 
IP
address xxx.xxx.xxx.xxx
(0.0.0.0 is disable)
ANET- Auxiliary Network Settings Related
Commands
obj,attr Description sta cha ope type Range of Values
net2,des Description
 
text 30 char (Mid-String Voltage
Module n Channel c)
net2,ena Enable   number 0=disable 1=enable
net2,ip Static IP address   IP
address xxx.xxx.xxx.xxx (not used if
DHCP enabled)
net2,sub Static Subnet Mask
 
IP
address xxx.xxx.xxx.xxx (not used if
DHCP enabled)
net2,gtwy Static Gateway (Router) IP   IP
address xxx.xxx.xxx.xxx (not used if
DHCP enabled)
net2,host Hostname
 
text