GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 145)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
145
following command:
ope dc1,stt=“boost”
The tables below summarize the object-attribute pairs in the system along with the commands
that can be used with the pair and the valid range that the attribute may have. The values in bold
text are the default settings for the attributes.
Objects, Attributes, and Related Commands
PSM- Power System Related
Commands
obj,attr description sta cha ope type Range of Values
ps1,ide Identifier  text PS1
ps1,des Power system description  text
≤ 32 characters
ps1,sid Site ID
 
text Up to 20 characters
ps1,sde Site Description

text Up to 55 characters
ps1,sys System Description   text Up to 55 characters
ps1,swv Software version

text d.d
ps1,verw Web pages version

text d.d
ps1,verb Boot block version  text d.d
ps1,verd Display version  text d.d
ps1,dflt Defaults version

text d.d
ps1,brc Board code

text “”
ps1,sn Serial number

text YYLLdddddddd
ps1,dow Day of week

Text Sunday…Saturday
ps1,dat Date
 
date format matching ps1,dtf
ps1,dtf Date format
 
text mm-dd-yyyy, dd-mm-yyyy,
yyyy-mm-dd
ps1,tim Time
 
time hh:mm
ps1,tmf Time format
 
number 12, 24
ps1,dls Daylight savings enable   number 0=disabled 1=enabled
ps1,tzo Time zone offset
 
number -840 - +840 minutes (±14
hours)
ps1,lng Language
  
text ENGLISH, OTHER
OPE changes the
descriptions
ps1,tun Temperature units
 
text C, F
Ps1,cem Critical equals major
 
number 0=disable, 1=enable
ps1,fpc Front panel configuration
 
number 0=disable, 1=enable
ps1,rrf Remote rectifier off
 
number 0=disable, 1=enable
ps1,poe Power off enable
 
number 0=disable, 1=enable
ps1,usl Uninstall missing equipment
 
number 1
ps1,usr Username enable
 
number 0=disable, 1=enable
ps1,dct Display contrast
 
number 0 – 100 %
ps1,ptt Communication port type
 
text “LOCAL”,”MODEM”
ps1,amt System ambient temperature  number dd
°C
ps1,fst Factory defaults
 
text See ps1,fstl
ps1,fstl Factory defaults list

text Comma delimited list of
defaults
ps1,rap Reset Passwords
 
number 1 = reset passwords (OPE
only valid from local