GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 51)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
51
3. Number Of Battery Strings
4. Manual Discharge Test Type
5. Manual Test Duration
6. Manual Test Check Battery Alarm Voltage Threshold
7. Battery Test Rectifier Voltage
8. System Date Format
9. System Date
10. System Time Format
11. System Time
12. Automatic Daylight Savings Feature
13. Display Contrast
14. Temperature Display Units
15. Alarm Test Feature
16. Alarm Test Relay Duration and Relay
Once a user enters the PIN, total front panel access is allowed for:
• As long as the user remains in menus other than the default menu and/or
• The default display has remained on the front panel for more than user configurable time-
out value. The Galaxy Pulsar Edge family of controllers has a factory configured default
of 120 minutes. This time is adjustable between 1-120 minutes in 1 minute increments.
120 minutes is the factory default.
• An internal counter shall be kept and reset if the user leaves the default menu and returns
to others menus before the time-out period is reached.
Front Panel Menu Flow
The following figures provide a menu flow map for each primary category. This information is
followed up with brief descriptions of each of the menu items. Alarms and Warnings are not
hierarchal mapped and are presented in chronological order of occurrence when they are present.
No Active Alarms or No Active Warnings will be displayed when they are no alarms or warnings
detected by the controller.