GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 56)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
56
Web Pages
Using a standard browser or the EasyView 2 graphical user interface program provides the best
mechanism for accessing the controller. All items accessible from the front panel are available
through these interfaces. In addition, features like custom alarm mapping are available through
the remote interfaces but is not available through the front panel. In general, front panel items are
mapped over and are easily identified within the web page menu tabs.
• Front panel “Configuration” found in Web page “Settings”
• Front panel “Control/Operation” found in Web page “Maintenance”
• Front panel “Status/History” found in Web page Home Page/Settings/Reports
Controller features and operation will be identified using the web page perspective. Once
connected through the network port or the serial port using the EasyView 2 GUI, a Home
page similar to that below is presented. The Home Page tabs are partitioned as follows:
Home Page Overview
Home
Main login page with representative graphic of the power components depicted:
the number of shelves, rectifiers in place with their appropriate outputs, empty
slots, and an indication of which rectifiers are in alarm or Off.
High-level summary of Batteries, Distribution, Alarms present, and controller are
shown. There are tabs that take you to specific features. These tabs are the Home,
Reports, Maintenance, Settings, Installation and Software.
Reports
The reports tab provides access to various system reports such as Event History,
Inventory, Statistics, Trends, and Battery on Discharge. Individual group event
histories for Alarms, Boost, Login, Rectifier, and Converter are also available.