GE Industrial Solutions Galaxy Pulsar Edge - Manual (Page 48)

Galaxy Pulsar Edge Power System Controller
Issue 3 October 2011
48
Port Description
Front Panel
Serial Craft
ports
J6
A laptop PC can be connected to standard DB9 connector J6 to provide a
ground-referenced RS-232 serial or to the available minis series-B USB
connection on certain configurations for local craft access. EasyView 2 or the
T1.317 command line can be used to facilitate this access. Controller with
RS232 ports can also be configured and used with external modems.
Rear
J5
Applications utilizing the Galaxy Pulsar Edge controller provide a standard RJ-
45 Ethernet connector, J5, to access the integrated 10/100 Base-T network
connection. This connection can be at the rear or at the front of the system as
shown. It can be used for remote monitoring or as a local Craft port. In the
remote monitoring applications, Lineage Power Galaxy Manager or other
SNMP based programs used for web-based remote access and network
management can be used.
Front Panel Menu Structure
Feature content at the front panel is functionally divided at the Galaxy Pulsar Edge’s Main Menu
J5
RS232
USB
USB
Rear Access
Front Access
J6
RS232
USB