Micromod RetroPAK: SLC Configuration Manual User Manual
Page 158
Advertising
Command Series Migration to MOD 30ML
Pre-configured Dual Loop PID with Remote SP
To change the values of the following:
Proportional Gain - S12
Integral Reset – S13
Derivative Rate – S14
To enter a local value, open the ENG function block (Expression block) and select the
Inputs tab. Double click on the number next to the desired input GAIN, RESET,
PREACT) and change the value.
See figure below:
Dual PID with
Remote SP
P4- 12
Advertising
This manual is related to the following products: