Micromod RetroPAK: SLC Configuration Manual - Manual (Page 81)

Command Series Migration to MOD 30ML
Function Codes – Gallery Tutorial
COMPILING THE DATABASE
It is necessary to compile the database without errors before downloading to the
instrument.

Only compiled databases can be downloaded to the instrument.
24. Select Instrument-Compile from the menu bar.
Figure 2 .58.
Instrument Compile
• The Compile Setup dialog box as shown below will appear. Click on OK (Do not reassign
block occurrence numbers).
Figure 2 .59.
Compile Setup
• The Interface File Options dialog box will be displayed as shown next. The interface files
are needed for integrating an HMI system with the controller and requires configuration of
a CL (Configured List) block in this database. It is beyond the scope of this lab and we do
not need to create an interface file.
• Click on the Cancel button on this dialog box.
2 - 43