Micromod RetroPAK: SLC Configuration Manual User Manual
Page 197
Advertising
Command Series Migration to MOD 30ML
Pre-configured PID Ratio with Remote SP
To change the values of the following:
Proportional Gain - S12
Integral Reset – S13
Derivative Rate – S14
To enter a local value, open the ENG function block (Expression block) and select the
Inputs tab. Double click on the number next to the desired input GAIN, RESET,
PREACT) and change the value.
See figure below:
PID Ratio with
Remote SP
P6- 11
Advertising
This manual is related to the following products: