Micromod RetroPAK: SLC Configuration Manual - Manual (Page 212)

Command Series Migration to MOD 30ML
Function Code 2- Manual Set Constant
Millisecond time Format: hh:mm:ss.xxx (xxx in millisecond)
Hex Hexadecimal
Momentary discrete 0 or 1
ASCII ASCII Characters/String
INPUTS - OUTPUTS
Signal Type Block Description
S1 Input – S1
Floating Point FC2 (EX
block) Initial value of the input is typed in the
input configuration. The value of the input
can be changed from instrument display if
configured.
N Output -
Floating Point
FC2 Connect from the R (result) attribute of
the EX block. This is the manual set
constant value.
Figure 2 .2.
2 - 2