Micromod RetroPAK: SLC Configuration Manual - Manual (Page 249)

Function Code 16 – Multiply
GENERAL DESCRIPTION
This function performs a multiplication of two input signals (S1 by S2) with the result
multiplied by a constant gain parameter S3.
The following equation describes the operation of this function:
Output = S3 * ( S1 * S2)
UTILIZATION
The MOD 30ML/MODCELL compound FC17 used here has an EX function block
(Expression block).
Figure 16 .1.
Function Code 11
The EX block has two inputs S1 and S2 that need to be connected to the attributes for the
multiplication and one more input S3 that multiplies the result.
EXPLANATION
The scalar/gain input S3 has default value 1. This can be changed in the input
configuration. The compound also allows you to connect external inputs to S3.
See the Input configuration page of the EX block in the next figure.
16 - 1