Adding compound from the gallery – Micromod RetroPAK: SLC Configuration Manual User Manual
Page 55
Command Series Migration to MOD 30ML
Function Codes – Gallery Tutorial
ADDING COMPOUND FROM THE GALLERY
11. We will now use a compound from the Bailey Function Code section of the gallery to
configure this control loop.
Compound Gallery: Pre-configured control loops and applications are stored in the
Gallery in the Vizapp Software. The gallery is basically a library of preconfigured
function blocks that are also connected for performing control and calculation tasks. The
software is shipped with a default gallery that includes most of the commonly used loops
and functions in the MOD 30ML. The user can also create configuration of frequently
used control applications and store them in this default gallery. The default gallery is
contained in the file Defaultgallery.fgal.
• To display the gallery, select Project from the menu bar again and then select Gallery-
Component Gallery from the drop-down menu as shown in the next figure:
Gallery Menu
• The gallery will be displayed as shown in the next figure:
2 - 17