Micromod RetroPAK: SLC Configuration Manual - Manual (Page 18)

Command Series Migration to MOD 30ML
Function Codes – Introduction
FUNCTION BLOCK EXECUTION ORDER:
The order in which the blocks in the database are executed is known as the Function Block
execution order. The execution order is set at the top level where the loop compounds are
added to the database. The default execution order for the loop compounds is the order in
which they are placed in the database. The default execution order for the blocks inside the
loop compound is the order in which they are placed inside the loop compound.
The execution order of the loop compounds and the function blocks can be changed by the
user during the configuration process.
To view and change the execution order of function blocks in a database, select Objects –
Set Execution Order – List Mode from the menu bar in ViZapp. See the following
figure:
Figure 1 .4.
Function blocks
Execution Order
1 - 10