Micromod RetroPAK: SLC Configuration Manual - Manual (Page 256)

Command Series Migration to MOD 30ML
Function Code 20 – Indicator Station
• A text edit box will appear in the area below and you will see a text edit cursor blinking.
• Type the name of your display ta. Refer to the next figure.
a
If you had more than one display blocks in your configuration, you will need to add
their display tags in the DIF block as explained in the above step. The order in which
the display tags appear in this list is the order in which the displays will scroll when
you press the Tag button on the instrument. The display block gets executed by the
instrument when it is loaded on the face of the instrument. If you did not add the
display tag of a display block to this list, that display will not appear on the instrument
when you press the Tag button.
Figure 20 .5.
Closing Compound

The Instrument tag field displays a unique tag name for the instrument. An instrument can
have multiple displays each with its own tag name. The instrument tag is useful in
identifying the instrument.
• Click on the OK button when you are done.
20 - 4