Micromod RetroPAK: SLC Configuration Manual - Manual (Page 210)

Command Series Migration to MOD 30ML
Function Code 1- Function Generator
Figure 1 .2.
Function
Generator
compound
INPUTS - OUTPUTS INPUTS - OUTPUTS
Signal Type Description
S1 Input -
Floating
Point
Connect the signal to be linearized to the FC1 -
LN.S1 signal of the compound. This is in turn
connected to the INPUT attribute of the LN block.
N Output -
Floating
Point
Connect from the FC1 – LN.N signal of the
compound. This is in turn connected to the R (result)
attribute of the LN block. This is the linearized result.
APPLICATIONS
This compound is meant for linearization of signals and can be used in applications such
as Setpoint Programming or Biasing, Noise Filter, Adaptive gain for non-linear process
etc. More instances of this compound can be used for achieving greater curve resolutions.
1 - 2