Micromod RetroPAK: SLC Configuration Manual - Manual (Page 72)

Command Series Migration to MOD 30ML
Function Codes – Gallery Tutorial
CONFIGURING DISPLAY TAG FOR THE PID DISPLAY
19. Each display configured in the MOD 30ML has a unique display tag. The FC156 PID
(PV/LOCAL SP) has a pre-configured display.
• Open the display block PID Display by double-clicking on it. See the next figure:
Figure 2 .47.
PID Display
• The default display tag name configured in this compound is PID-101. Change it to FIC-
100. See the next figure:
2 - 34