Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 163)

Survey Menu – Conventional Mode
R-155
Remote Elevation
Survey Remote Elevation .
The Remote Elevation screen will compute the elevation for the
occupy point by shooting a foresight with a known elevation, or it will
compute the elevation for a foresight when the occupy elevation is
known.
Known Elevation Is…: is where you specify if
the Occupy point or the Foresight point has a
known elevation.
Elevation: is the known elevation for the
selected point.
Shoot: defines if you want to perform a Direct
shot only, or Direct & Reverse shots to the
foresight.
HI: is the distance that the total station is
above the ground.
HR: is the length of the rod.
: opens the Smart Target options (Page R-449).
; Store Pt : When checked, the elevation of the point specified here
will be replaced with the computed elevation.
Take Shot… : computes the elevation for the point that had an
unknown elevation and optionally writes that elevation to the
specified Store Pt.
Results
OCC Elevation: displays the elevation for the occupy point.
FS Elevation: displays the elevation for the foresight point.