Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 245)

Survey Menu – GPS Module
R-237
temporary WGS84 geodetic location using the source coordinate
system, and then into a new plane location using the destination
coordinate system. Points with a geodetic location will be
transformed into a new plane location using the destination
coordinate system.
• Adjust only geodetic points: only points with geodetic locations
will be adjusted. All eligible points with geodetic locations will be
transformed into a new plane location using the destination
coordinate system.
Readjust with Current Projection
: use this mode when you want to
readjust locations using the current coordinate system. This mode
has two options:
• Geodetic to Plane (Hold LLH | Adjust NEE): use this option to
adjust the plane location of selected points with a geodetic
coordinate. The plane location of selected points with a geodetic
location will be recalculated using the current coordinate system
set in the job.
Plane to Geodetic (Hold NEE | Adjust LLH)
: use this option to adjust
or add geodetic locations to all points. The plane coordinate of all
points will be used to calculate geodetic coordinates using the latest
projection. Points that have geodetic coordinates will be updated,
points that did not have geodetic coordinates will be set with the
latitude, longitude, and height calculated from the transformation.