Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 18)

Survey Pro Reference Manual
R-10
Create a New Job 3
Azimuth Type: specifies if you are surveying
with a North Azimuth or South Azimuth.
Units for Distances: specifies if your distances
will be entered in International Feet, U.S. Feet,
or Meters.
Note: You can enter a distance in any distance
field in units other than what is set for the job
by appending the distance value with the
following characters:
y f or ft or ift International Feet
y usf or usft US Survey Feet
y i or in Inches
y m Meters
y cm Centimeters
y mm Millimeters
y c or ch Chains
Once the cursor leaves that field, the distance will be converted
automatically. (A space between the value and the unit abbreviation
is optional.)
Units for Angles: specifies if angles will be entered in Degrees or
Grads.
; Adjust for Earth Curvature / Refraction : when checked, the
elevations recorded from all shots will be adjusted to compensate for
earth curvature and refraction.
; User Scale Factor : when checked, all horizontal distances when
taking shots will be adjusted by the scale factor entered here.
Next > : opens the final screen, which can be one of two different
possible screens depending on if a control file is being imported.