Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 298)

Survey Pro Reference Manual
R-290
1. A new backsight circle value is computed, sent to the instrument
and stored in the raw data
2. The Angle Right value is changed to zero to reflect the change. The
instrument now needs to be turned horizontally to zero to face the
current target location.
3. To prevent errors if this button is used, the backsight set up is
invalidated when exiting the Stakeout dialog. A circle zeroed on a
design point is meaningless once the design point has been
staked.
Note: The Circle Zero button is not available when using a robotic
total station.
< Back : returns to the previous screen.
Stake > : opens the next screen.
Offset Staking – Screen Five
Height of Rod: is the length of the rod.
Design Elev: displays the current design
elevation, which can be modified with the
Change… button.
FORWARD / BACK: indicates if the rod must
move forward (toward the total station) or
backward (away from the total station).
Go RIGHT / Go LEFT: indicates if the rod must
move to the right or left from the total station’s
point of view.
EDM: This button can be toggled to shoot in various EDM modes.
The options available depend on the total station being used. Consult
the total station’s documentation for more information on the EDM
modes that it supports.
CUT / FILL: displays the required amount of cut or fill to bring the
stake point to the design point’s elevation.