Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 336)

Survey Pro Reference Manual
R-328
Define a Location
Stakeout Define a Location .
The Define a Location screen is used to manually enter the distance
and direction to a new point from any existing reference point and
then stakeout the new point.
From Point: is the reference point that the specified angle and
distance information is applied to for locating
the new point.
Azimuth / Bearing : is the direction from the
reference point to the new point.
+/- Angle: is the angle to be added to the
specified azimuth or bearing, thus modifying
the direction to the new point.
Note: To subtract an angle from the specified
azimuth or bearing, enter a negative +/- Angle
value.
Horiz. Dist: is the horizontal distance from the reference point to the
new point.
Vert. Dist: is the vertical distance from the reference point to the new
point.
Store point: When this is checked, the computed point will be stored
with the name specified here.
Solve : will compute the location for the new point and access the
next screen.
Define a Location – Screen Two
The second Define a Location screen displays the direction and
distance information from the occupy point to the new point.