Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 330)

Survey Pro Reference Manual
R-322
Stake DTM – Screen Two
Stakeout Stake DTM Next > .
The second Stake DTM screen displays all
relevant information for the current rod
position and a graphic that shows the reference
DTM surface and its corners. Once a shot is
taken, the rod location and the occupied TIN
triangle are displayed.
Data: shows the angle and distance
information from the previous shot.
Result: shows the current northing, easting, and elevation of the
rod as well as the computed elevation of the reference DTM at
the current location and the cut or fill necessary to bring the
elevation at the current location to the elevation of the reference
DTM at the current location.
Note: If the DTM and Cut or Fill fields are blank after taking a shot, it
indicates the rod is outside the reference DTM boundary.
Centerline: shows the current station and offset information for the
rod location relative to the centerline selected from the previous
screen. The type of line segment in the polyline or alignment at the
current station is also displayed. (This card is only available if the
With Centerline checkbox was checked in the first Stake DTM
screen.)
Note: Tapping anywhere within the map view will open a larger map
view with zoom controls.
Point: is the point name that will be assigned to the next stored stake
point.