Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 284)

Survey Pro Reference Manual
R-276
4. The dialog shown here will be
displayed the first time Circle Zero is
used during a stakeout session to warn
that the original backsight reference
will be lost.
Note: The Circle Zero button is not available
when using a robotic total station.
< Back : returns to the first screen.
Stake > : opens the third and final Stake Points screen where the
shots to the stake point are performed.
Stake Points – Screen Three
Height of Rod: is the length of the rod.
Design Elev: displays the current design
elevation, which can be modified with the
Change… button.
FORWARD / BACK: indicates if the rod must
move forward (toward the total station) or
backward (away from the total station).
Go RIGHT / Go LEFT: indicates if the rod must
move to the right or left from the total station’s
point of view.
EDM: This button can be toggled to shoot in various EDM modes.
The options available depend on the total station being used. Consult
the total station’s documentation for more information on the EDM
modes that it supports.
CUT / FILL: displays the required amount of cut or fill to bring the
stake point to the design point’s elevation.
Rod Elev: displays the elevation at the rod’s location computed from
the last shot.