Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 353)

Stakeout Menu – GPS & Basic GPS Module
R-345
Stake DTM
Stakeout Stake DTM .
The Stake DTM routine allows you to stake an area and get cut / fill
and volume information based on a reference DTM or specified
elevation datum.
The first screen of this routine is similar to the conventional method,
except that the Backsight button is replaced with a Setup HR button
to configure rover antenna and the backsight information is replaced
with rover antenna height information. See Page R-319 for details.
DTM GPS Shot
Stakeout Stake DTM Solve .
The DTM GPS Shot screen displays all relevant information on the
current rover position and a graphic that shows the rover location,
the occupied TIN triangle, and the rectangular DTM corners of the
DTM boundary.
Note: the DTM boundary corners and TIN
triangle may not be visible depending on the
current scale of the screen.
OCCUPYING / ROVING : switches from
ROVING
to OCCUPYING mode. When
ROVING, the receiver is in dynamic mode and
will calculate your position as you move to the
point. When OCCUPYING, the receiver is
switched to static mode (depending on settings)
and will calculate the most precise position for the staked point.