Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 332)

Survey Pro Reference Manual
R-324
Station Staking
Stakeout Station Staking .
The Station Staking routine allows you to stake the stations, offsets,
and surfaces built into a LandXML file.
The first Station Staking screen is used to load a LandXML file and
view the details of that file.
The box on the left displays the horizontal view
of the centerline include within the LandXML
file and the box on the right shows the vertical
view.
Set Center Line… : allows you to select any
polyline or alignment in the current job to use
as a centerline. This will replace any
centerline loaded from the LandXML file.
View Cross-Sections… : opens the Cross-
Section View screen, described below, where
you can view the station, surface, and offset details of the loaded
LandXML file.
Load From LandXML… : opens the Open screen (Page R-13) where you
can select which LandXML file to load.
Backsight… : opens the Backsight Setup screen (Page R-118) where
you can set your backsight.
Next > : opens the next Station Staking screen.