Spectra Precision Survey Pro v4.5 Ranger Reference Manual - Manual (Page 430)

Survey Pro Reference Manual
R-422
Road Slope Staking – Screen Two
The second Road Slope Staking screen is used
to set up some slope stake parameters prior to
slope staking the road.
Station: is the station to be slope staked.
Station Interval: specifies how far to advance
from the current station to the next station.
Next Station : advances the current station by
the Station Interval.
Note: If the Stake Corners option is selected in
the Stakeout Settings screen, the Next Station button will also stop at
any horizontal or vertical alignment node, and the beginning and end
of any widening and super elevation that falls within the interval.
Backsight… : opens the Backsight Setup screen (Page R-118).
< Back : returns to the previous screen.
H. Map Card
The H. Map card displays information about the horizontal details of
the road at the current station.
Segment Type: displays the type of horizontal section at the current
station.
Left / Right: is the description of the left and right templates that are
being used at the current station.
V. Map Card
The V. Map card displays a graphic of the cross-
sectional profile of the road at the current
station. The hinge points and slopes are also
displayed.